Description
Schneider Electric SH32051P11F2000 — Servo Motor. Manufacturer designation: Servo motor SH3 205 36,9Nm,key,single,brake,90°conn.IP54/IP65,3.8k RPM. New original part, traceable to the manufacturer. Availability and price on request.
Technical Specifications
| Manufacturer | Schneider Electric |
|---|---|
| Article No. (MPN) | SH32051P11F2000 |
| Product Category | Drives & Controls |
| Range compatibility | PacDrive 3 |
| Product or component type | Servo motor |
| Maximum mechanical speed | 3800 rpm |
| [Us] rated supply voltage | 115…480 V |
| Network number of phases | Three phase |
| Continuous stall current | 21 A |
| Continuous stall torque | 36.9 N.m at 115…480 V three phase |
| Continuous power | 5500 W |
| Peak stall torque | 110 N.m at 115…480 V three phase |
| Nominal output power | 2510 W at 115 V single phase; 4240 W at 230 V single phase; 5500 W at 400 V three phase; 5200 W at 480 V three phase |
| Nominal torque | 31.9 N.m at 115 V single phase; 27 N.m at 230 V single phase; 17.5 N.m at 400 V three phase; 13.8 N.m at 480 V three phase |
| Nominal speed | 750 rpm at 115 V single phase; 1500 rpm at 230 V single phase; 3000 rpm at 400 V three phase; 3600 rpm at 480 V three phase |
| Maximum current Irms | 87.2 A |
| Shaft end | Parallel key |
| Shaft diameter | 38 mm |
| Shaft length | 80 mm |
| Key width | 10 mm |
| IP degree of protection | IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5; IP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5 |
| Encoder type | Absolute single turn SinCos Hiperface |
| Speed feedback resolution | 128 periods |
| Holding brake | With |
| EAN / GTIN | 3606485298467 |
| Condition | New & original |
| Availability | On request |
Download official Schneider Electric datasheet (PDF)
Independent distributor — not an authorised Schneider Electric dealer. All parameters are taken from the official manufacturer documentation.
