Description
SD202/25 – Switch Disconnector – 2P, 25A. New original ABB part, traceable to the manufacturer. Availability and price on request.
Technical Specifications
| Contact Position Indication | ON / OFF |
|---|---|
| Number of Poles | 2P |
| Rated Voltage (Ur) | 440 V ; 12 V Minimum |
| Rated Operational Voltage | 440 V AC ; 125 V DC |
| Operational Voltage | Maximum 462 V AC ; Maximum 131 V DC ; Minimum 12 V AC |
| Voltage Protection Level ( Up) | 4 kV |
| Rated Impulse Withstand Voltage (Uimp) | 4 kV ; at 2000 m 5 kV ; at Sea Level 6.2 kV |
| Input Voltage Type | AC/DC |
| Rated Current (In) | 25 A |
| Rated Short-Circuit Capacity | (230 / 400 V AC) 25 kA |
| Rated Conditional Short-Circuit Current (Inc) | 25 kA |
| Rated Frequency (f) | 50 / 60 Hz ; DC |
| Power Loss | at Rated Operating Conditions per Pole 0.6 W |
| Number of Contacts CO | 0 |
| Number of Contacts NC | 0 |
| Number of Contacts NO | 2 |
| Overvoltage Category | III |
| Degree of Protection | IP20 ; Enclosure with Cover IP40 |
| Pollution Degree | 3 |
| Screw Terminal Type | Failsafe Bi-directional Cylinder-lift Terminal |
| Switch Type | Off |
| Actuator Material | Insulation Group II, Red, Sealable |
| Cover Color | Grey |
| Terminal Type | Screw Terminals |
| Actuator Type | Toggle |
| Housing Material | Insulation Group I, RAL 7035 |
| Ambient Air Temperature | Operation -25 … +55 °C ; Storage -40 … +70 °C |
| Mounting Type | DIN-Rail |
| Mounting Position | any |
| Standards | IEC/EN 60947-3 |
| Standardization Body | EN ; IEC |
| Width in Number of Modular Spacings | 2 |
| Product Net Width | 35 mm |
| Product Net Height | 88 mm |
| Product Net Depth / Length | 69 mm |
| Product Net Weight | 0.17 kg |
| Built-In Depth (t2) | 69 mm |
| EAN | 4016779904131 |
| Catalog Description | SD202/25 Switch Disconnector 2P, 25A |
| Electrical Endurance | 20000 AC cycle |
| Mechanical Endurance | 20000 cycle |
| Tightening Torque | 2.8 N·m |
| Utilization Category | Switching of motor loads or other highly inductive loads – frequent actuation (AC-23A) ; Switching of resistive loads, including moderate overloads – frequent actuation (DC-21A) |
| Actuator Marking | I / O |
| Recommended Screw Driver | Pozidriv 2 |
| Accessories Available | Yes |
| Connecting Capacity | Busbar 10/10 mm² ; Flexible with Ferrule 0.75 … 25 mm² ; Flexible 0.75 … 25 mm² ; Rigid 0.75 … 35 mm² ; Stranded 0.75 … 35 mm² |
| Installation Size | acc. to DIN 43880 3 |
| Environmental Conditions | 28 cycles ; with 55 °C / 90-96 % ; and 25 °C / 95-100 % |
| Resistance to Vibrations | 20 Cycles with Load 0.8 In: 5g 5 … 150 … 5 Hz |
| Resistance to Shock acc. to IEC 60068-2-27 | 25g 2 shocks 13 ms |
| E-Number (Finland) | 3601631 |
| E-Number (Norway) | 1429482 |
| Unspsc | 39122233 |
| Object Classification Code | Q |
| Certification Agency | IEC ; EN |
| Country of origin | Bulgaria |
| Recyclability Rate of the Product acc. to EN45555 | Design for Closing Resource Loops – Standard EN45555 – 85 % |
| ABB Site Meeting Group Waste To Landfill Target | No non-hazardous waste is sent to a landfill |
| Extended Product Lifetime | Product Durability is Enhanced |
| Customs tariff number | 85369095 |
| Manufacturer standard delivery time | 5 days |
| Packaging unit | Package x 5 |
| Product status (supplier data) | Active |
Independent distributor — not an authorised ABB dealer. All technical parameters are taken verbatim from the official ABB product data for this exact order code; packaging, customs and delivery data come from the supplier list entry for the same code.
