Description
Schneider Electric SH31002P12A2000 — Servo Motor. Manufacturer designation: Servo motor SH3 100 5,8Nm,key,multi,nobrake,90°conn.IP54/IP65,6k RPM. New original part, traceable to the manufacturer. Availability and price on request.
Technical Specifications
| Manufacturer | Schneider Electric |
|---|---|
| Article No. (MPN) | SH31002P12A2000 |
| Product Category | Drives & Controls |
| Range compatibility | PacDrive 3 |
| Product or component type | Servo motor |
| Maximum mechanical speed | 6000 rpm |
| [Us] rated supply voltage | 115…480 V |
| Network number of phases | Three phase |
| Continuous stall current | 4.8 A |
| Continuous stall torque | 5.8 N.m at 115…480 V three phase |
| Continuous power | 1900 W |
| Peak stall torque | 18.3 N.m at 115…480 V three phase |
| Nominal output power | 580 W at 115 V single phase; 1090 W at 230 V single phase; 1930 W at 400 V three phase; 2210 W at 480 V three phase |
| Nominal torque | 5.5 N.m at 115 V single phase; 5.2 N.m at 230 V single phase; 4.6 N.m at 400 V three phase; 4.4 N.m at 480 V three phase |
| Nominal speed | 1000 rpm at 115 V single phase; 2000 rpm at 230 V single phase; 4000 rpm at 400 V three phase; 4800 rpm at 480 V three phase |
| Maximum current Irms | 17.1 A |
| Shaft end | Parallel key |
| Shaft diameter | 19 mm |
| Shaft length | 40 mm |
| Key width | 6 mm |
| IP degree of protection | IP54 shaft bushing without shaft seal ring: conforming to IEC 60034-5; IP65 motor: conforming to IEC 60034-5; IP65 shaft bushing: conforming to IEC 60034-5 |
| Encoder type | Absolute multiturn SinCos Hiperface |
| Speed feedback resolution | 128 periods |
| Holding brake | Without |
| EAN / GTIN | 3606485296807 |
| Condition | New & original |
| Availability | On request |
Download official Schneider Electric datasheet (PDF)
Independent distributor — not an authorised Schneider Electric dealer. All parameters are taken from the official manufacturer documentation.
