Description
Selective main circuit-breakers of the S 750 DR series are SMCBs based on DIN VDE 0641-21 with voltage-independent operating principle. This means that they do not rely on a control circuit to make or break contact (SHU) and are therefore particularly suitable for use in energy distributionsystems with maximum availability requirements. They offer total selectivity to downstream MCBs and outstanding selectivity to upstream protective devices due to unique current limiting selectivity. New original ABB part, traceable to the manufacturer. Availability and price on request.
Technical Specifications
| Function | Single Pole Switching |
|---|---|
| Dielectric Test Voltage | 50 / 60 Hz – 1 min 2 kV |
| Power Supply Connection | Bottom |
| Contact Position Indication | Red ON / Green OFF |
| Number of Poles | 4P |
| Tripping Characteristic | K (Selective) |
| Rated Operational Voltage | 400 V AC |
| Rated Insulation Voltage (Ui) | acc. to IEC/EN 60664-1 690 V |
| Rated Impulse Withstand Voltage (Uimp) | 6 kV ; at 2000 m 8 kV ; at Sea Level 9.8 kV |
| Input Voltage Type | AC |
| Rated Current (In) | 35 A |
| Rated Short-Circuit Capacity | (400 V AC) 25 kA |
| Rated Frequency (f) | 50 / 60 Hz |
| Power Loss | at Rated Operating Conditions per Pole 6.2 W |
| Overvoltage Category | IV |
| Degree of Protection | IP20 ; Enclosure with Cover IP40 |
| Pollution Degree | 3 |
| Pole Net Weight | 0.35 kg |
| Suitable for Isolation | Yes |
| Screw Terminal Type | Cable Clamp |
| Terminal Type | Screw Terminals |
| Ambient Air Temperature | Operation -25 … +55 °C ; Storage -40 … +70 °C |
| Mounting Type | DIN-Rail |
| Mounting on DIN Rail | TH35-15 (35 x 15 mm Mounting Rail) acc. to IEC 60715 ; TH35-7.5 (35 x 7.5 mm Mounting Rail) acc. to IEC 60715 |
| Mounting Position | any |
| Standards | DIN VDE 0641-21 |
| Standardization Body | DIN |
| Product Net Width | 108 mm |
| Product Net Height | 130 mm |
| Product Net Depth / Length | 96 mm |
| Product Net Weight | 1.4 kg |
| EAN | 4016779838696 |
| Catalog Description | S754DR-K35 sel. main CB K-Char.,25kA,35A,4P |
| Carbon Footprint | Full Lifecycle 23.2 kg CO₂ eq |
| Tightening Torque | 2.5 … 3 N·m |
| Actuator Marking | I / O |
| Recommended Screw Driver | Cross Recess Pozidriv 2 ; Slotted 1 x 5.5 |
| Accessories Available | Yes |
| Connecting Capacity | Flexible with Ferrule 2.5 … 50 mm² ; Flexible 2.5 … 50 mm² ; Rigid 2.5 … 50 mm² ; Stranded 2.5 … 50 mm² |
| Installation Size | acc. to DIN 43880 3 |
| Environmental Conditions | 28 cycles ; with 55 °C / 90-96 % ; and 25 °C / 95-100 % |
| Resistance to Vibrations | 20 Cycles with Load 0.8 In: 2g 5 … 150 … 5 Hz |
| Resistance to Shock acc. to IEC 60068-2-27 | 30g 3 shocks 11 ms |
| EPLAN Data | 9AAC171911_EPLAN |
| E-Number (Norway) | 1634382 |
| Unspsc | 39121614 |
| Object Classification Code | F |
| Certification Agency | DIN |
| Recyclability Rate of the Product acc. to EN45555 | Design for Closing Resource Loops – Standard EN45555 – 45.9 % |
| ABB Site Meeting Group Waste To Landfill Target | No non-hazardous waste is sent to a landfill |
| Extended Product Lifetime | Product Durability is Enhanced |
| Country of origin | Bulgaria |
| Customs tariff number | 85369095 |
| Manufacturer standard delivery time | 28 days |
| Packaging unit | Package x 1 |
| Product status (supplier data) | Active |
Independent distributor — not an authorised ABB dealer. All technical parameters are taken verbatim from the official ABB product data for this exact order code; packaging, customs and delivery data come from the supplier list entry for the same code.
